Star Micronics PCI/ISA System Board D6-IN - Manual (Page 42)

D6-IN System Board Manual
Chapter 4: The BIOS Setup Utility
40
NOTE: Do not enable this category unless your IDE drive
supports spin-down mode.
CRT
Selecting ON (default) powers down the display while
the system is in power saving mode. Before making
changes, “Customized” must be selected in the Power
Management Mode category.
Mouse Wakeup Event
This selection causes the system to "wakeup" from a
power savings mode if the mouse is moved or a button
is pressed. The selections are PS/2 (IRQ12), COM1
(IRQ4), COM2 (IRQ3) or Disabled. The default set-
ting is PS/2.
Standby Break Events
Setting an IRQ category to Enabled causes the system to
“wakeup” from a power savings mode if any activity
occurs at that IRQ. For example, if you have a modem
on IRQ3 and you set IRQ3 to enabled, the system
automatically wakes up every time the modem gets a
phone call. The default setting is Disabled.