StarTech.com CONYX ECS0016 - Manual (Page 111)

Instruction Manual
104
The following command will synchronize the live system with the new
configuration:
# /bin/config –-run=alerts
MetaConnect Host Configuration
MetaConnect host TCP Ports
To setup the list of tcp ports for a host, you use the config command:
# config -s config.sdt.hosts.host3.tcpports.tcport1 = 23
# config -s config.sdt.hosts.host3.tcpports.tcport2 = 5900
# config -s config.sdt.hosts.host3.tcpports.tcport3 = 3389
The above assumes the config below:
# vi /etc/config/config.xml ~
</users>
</host1>
<total>3</total>
<host2>
<address>accounts.intranet.myco.com</address>
<description>Accounts server</description>
<users>
<total>1</total>
<user1>JohnWhite</user1>
</users>
</host2>
<host3>
<address>192.168.254.191</address>
<description>Tonys Win2000 Box</description>
<users>
<total>1</total>