Instruction manual – StarTech.com CONYX ECS0016 User Manual
Page 85
Instruction Manual
78
port attached. In
Applicable Hosts, check the IP address/DNS
name of the IIS server.
Click
13.
Connection Alert.
Click
14.
Apply.
Now, you can set the console server to send alerts to the Nagios server.
Lastly you need to add a User for the client running MetaConnect:
Select
1.
Users & Groups from the Serial & Network menu.
Click
2.
Add User.
In Username, enter: sdtnagiosuser, then enter and confirm a Password.
3.
In
4.
Accessible Hosts click the IP address/DNS name of the IIS server,
and in
Accessible Ports click the serial port that has the router
console port attached
Click
5.
Apply.
Enable Nagios on the ECS0016
Select
1.
System: Nagios on the ECS0016 Management Console and
select
Nagios service Enabled.
Enter the
2.
Nagios Host Name that the ECS0016 gateway will be
referred to in the Nagios central server – this will be generated from
local System Name (entered in System: Administration) if unspecified
In Nagios Host Address enter the IP address or DNS name that the
3.
Remote
ECS0016
Gateway