StarTech.com CONYX ECS0016 - Manual (Page 40)

Instruction Manual
33
Select the Serial & Network: RPC Connections menu. This will display 3.
all the RPC connections that have already been configured.
Click Add RPC. 4.
Enter a RPC Name and Description for the RPC. 5.
In “Connected Via” select the pre-configured serial port or the network 6.
host address that connects to the RPC.
Select any specific labels you wish to apply to specific RPC Outlets
7.
(e.g. the PDU may have 20 outlets connected to 20 powered devices
you may wish to identify by name).