Samsung MUXONENAND A-DIE KFM2G16Q2A - Manual (Page 54)

MuxOneNAND2G(KFM2G16Q2A-DEBx)
- 54 -
FLASH MEMORY
MuxOneNAND4G(KFN4G16Q2A-DEBx)
2.8 Registers
Section 2.8 of this specification provides information about the MuxOneNAND registers.
2.8.1 Register Address Map
This map describes the register addresses, register name, register description, and host accessibility.
Address
(word order)
Address
(byte order)
Name
Host
Access
Description
F000h 1E000h Manufacturer ID R Manufacturer identification
F001h 1E002h Device ID R Device identification
F002h 1E004h Version ID R N/A
F003h 1E006h Data Buffer size R Data buffer size
F004h 1E008h Boot Buffer size R Boot buffer size
F005h 1E00Ah
Amount of
buffers
R Amount of data/boot buffers
F006h 1E00Ch Technology R Info about technology
F007h~F0FFh 1E00Eh~1E1FEh Reserved - Reserved for user
F100h 1E200h Start address 1 R/W
Chip address for selection of NAND
Core in DDP & Block address
F101h 1E202h Start address 2 R/W Chip address for selection of BufferRAM in DDP
F102h 1E204h Start address 3 R/W Destination Block address for Copy back program
F103h 1E206h Start address 4 R/W
Destination Page & Sector address for Copy
back program
F104h 1E208h Start address 5 R/W Number of Page in Synchronous Burst Block Read
F105h 1E20Ah Start address 6 - N/A
F106h 1E20Ch Start address 7 - N/A
F107h 1E20Eh Start address 8 R/W NAND Flash Page & Sector address
F108h~F1FFh 1E210h~1E3FEh Reserved - Reserved for user
F200h 1E400h Start Buffer R/W
Buffer Number for the page data transfer to/from the mem-
ory and the start Buffer Address
The meaning is with which buffer to start and how many
buffers to use for the data transfer
F201h~F207h 1E402h~1E40Eh Reserved - Reserved for user
F208h~F21Fh 1E410h~1E43Eh Reserved - Reserved for vendor specific purposes
F220h 1E440h Command R/W Host control and memory operation commands
F221h 1E442h
System
Configuration 1
R, R/W memory and Host Interface Configuration
F222h 1E444h
System
Configuration 2
- N/A
F223h~F22Fh 1E446h~1E45Eh Reserved - Reserved for user
F230h~F23Fh 1E460h~1E47Eh Reserved - Reserved for vendor specific purposes
F240h 1E480h Controller Status R Controller Status and result of memory operation
F241h 1E482h Interrupt R/W Memory Command Completion Interrupt Status
F242h~F24Bh 1E484h~1E496h Reserved - Reserved for user
F24Ch 1E498h
Start
Block Address
R/W Start memory block address in Write Protection mode