Samsung MUXONENAND A-DIE KFM2G16Q2A - Manual (Page 142)

MuxOneNAND2G(KFM2G16Q2A-DEBx)
- 142 -
FLASH MEMORY
MuxOneNAND4G(KFN4G16Q2A-DEBx)
5.4 AC Characteristics for Synchronous Burst Read
See Timing Diagrams 6.1, 6.2, 6.3, 6.4 and 6.24
NOTE :
1) If OE is disabled at the same time or before CE is disabled, the output will go to high-z by t
OEZ .
If CE is disabled at the same time or before OE is disabled, the output will go to high-z by t CEZ .
If CE and OE are disabled at the same time, the output will go to high-z by t OEZ .
2) It is the following clock of address fetch clock.
Parameter Symbol
66MHz 83MHz
Unit
Min Max Min Max
Clock CLK 1 66 1 83 MHz
Clock Cycle t CLK 15 - 12 - ns
Initial Access Time t IAA - 70 - 70 ns
Burst Access Time Valid Clock to Output Delay t BA - 11 - 9 ns
AVD Setup Time to CLK t AVDS 5 - 4 - ns
AVD Hold Time from CLK t AVDH 2 - 2 - ns
AVD High to OE Low t AVDO 0 - 0 - ns
Address Setup Time to CLK t ACS 5 - 4 - ns
Address Hold Time from CLK t ACH 6 - 6 - ns
Data Hold Time from Next Clock Cycle t BDH 3 - 2 - ns
Output Enable to Data t OE - 20 - 20 ns
CE Disable to Output & RDY High Z t CEZ1)
- 20 - 20 ns
OE Disable to Output High Z t OEZ1)
- 15 - 15 ns
CE Setup Time to CLK t CES 6 - 4.5 - ns
CLK High or Low Time t CLKH/L t CLK /3 - 5 - ns
CLK 2) to RDY valid t RDYO - 11 - 9 ns
CLK to RDY Setup Time t RDYA - 11 - 9 ns
RDY Setup Time to CLK t RDYS 4 - 3 - ns
CE low to RDY valid t CER - 15 - 15 ns