Samsung MINI SMART SCC-C7325 - Manual (Page 24)

24 – 10X MINI SMART DOME CAMERA
Operation
Privacy Zone Mask
To protect privacy, MAX. 4 Privacy Masks can be
created on the arbitrary position to hide objects such
as windows, shops or private house. With Spherical
Coordinates system, powerful Privacy Zone Mask
function is possible.
GENERAL/SPECIAL Image Setup
WB(White Balance) and AE(Auto Exposure) can
be set up independently for each preset. There
are 2 modes, “General” mode & “Special” mode.
The General mode means that WB or AE can be
set up totally and simultaneously for all presets in
“ZOOM CAMERA SETUP” menu. The Special mode
means that WB or AE can be set up independently
or separately for each preset in each preset setup
menu. Each Special WB/AE value should activate
correspondingly when camera arrives at each preset
location.
During jog operation, General WB/AE value should be
applied. All Special WB/AE value will not be changed
regardless of General WB/AE value change.
Semi Auto Focus
This mode enables to switch focus mode
automatically operation by operation. Manual focus
mode is selected during preset operation and Auto
focus mode is recovered if jog operation is started.
During Preset action, instead of auto focusing,
manual focus data stored when it is created will be
applied as soon as camera arrives to the preset.
This is helpful to get well-focused image in a short time.
OSD DISPLAY OF MAIN SCREEN

•
•
•
P/T/Z INFORMATION
Current Pan/Tilt angle in degree, zoom magnifi cation
and a compass direction.
Camera ID
Current Camera ID(Address).
Action Title
Followings are possible Action Titles and their
meaning.
“SET PRESET ×××” When Preset ××× is stored
“PRESET ×××” When camera reach to
Preset ×××
“PATTERN ×” When Pattern × is in action
“AUPx/PRESET XXX” When Auto Pan x is in action
“UNDEFINED” When undefi ned function is
called to run
Preset Label
The Label stored for specifi c Preset.
Alarm Information
This information shows current state of Alarm Input.
The “I” means Input and “O” is output. If an Input is
ON state it will show the number of input. If an Input
is OFF state, ‘-’ will be displayed. In the same way
“O:1” means output 1 is ON “O:-“ is OFF.
Ex) When Point 2 of inputs are ON, and Output 1 is
On, OSD will show as below
I:-2 0:1
Image Flip
Shows that images are currently reversed by Auto
Flip Function.
Temperature
Current Temperature: Boxed “C” and “F” means
Celsius and Fahrenheit respectively
Date/Time
Displays Current Date and Time.
•
•
•
•
•
•
•
•
G
O
M
Preset Lable 1 LABEL12345 PRESET1 Action Title
Date/Time
Camera ID
Image Flip
Camera ID
P/T/Z Information
Alarm
Information
Temperature