Samsung MINI SMART SCC-C7325 - Manual (Page 27)

English – 27
ENG
How to use OSD Menu
AUTO FLIP [ON/OFF]
Refer to “Other Functions” section.
JOG MAX SPEED [2°/sec ~360°/sec]
Sets maximum jog speed. Jog speed is inversely
proportional to zoom magnifi cation. As zoom
magnifi cation goes up, pan/tilt speed goes down.
JOG DIRECTION [INVERSE/NORMAL]
If you set this to ‘Normal’, the view in the screen is
moving same direction with jog tilting. If ‘Inverse’ is
selected, the view in the screen is moving reversely.
FREEZE IN PRESET [ON/OFF]
At start point of preset movement, camera starts
freezing the image of start point. Camera keeps
displaying the image of start point during preset
movement and does not display the images which
camera gets during preset movement. As soon as
camera stops at preset end point, camera starts
displaying live images which it gets at preset end
point.
This function availability should be different by
models.
Parking Action Setup
PARKING ACTION SETUP
PARK ENABLE OFF
WATT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
If Park Enable is set to ON, camera runs assigned
function automatically if there is no PTZ command
during assigned “Wait Time”.
PARK ENABLE [ON/OFF]
WAIT TIME [5 seconds ~ 4 hour]
The time is displayed with “hh:mm:ss” format and
you can change this by 1 min unit.
PARK ACTION [HOME/PRESET/PATTERN/
AUTO PAN/SCAN]
Ex) If HOME is selected for Park Action, camera
will move to home position when there is no PTZ
command during assigned “Wait Time.”
•
•
•
•
❖
•
•
•
Alarm Input Setup
ALARM INPUT SETUP
ALARM1 N.O PRESET1
ALARM2 N.C NOT USED
BACK
EXIT
Match the Alarm sensor input to one of Preset
positions. If an external sensor is activated, camera
will move to corresponding preset position when this
item is predefi ned.
ALARM TYPE
[Normal OPEN(N.O) / Normal CLOSE](N.C)]
Sets sensor input type.
ALARM ACTION
[NOT USED/HOME/PRESET 1~128/SCAN 1~8,
PATTERN1~4, SCAN 1~4]
For each Alarm input, you can assign
counteraction functions (Preset, Auto Pan, Pattern
and Scan).
FUNCTION SETUP
FUNCTION SETUP
<PRESET SETUP>
<AUTO PAN SETUP>
<PATTERN SETUP>
<SCAN SETUP>
<SCHEDULE SETUP>
BACK
EXIT
Confi gure 5 Special Functions with this menu
PRESET SETUP
127 Presets from the number 1 to 128 can be
assigned excluding preset 95 reserved for Menu.
❖
•
•
•