Samsung MINI SMART SCC-C7325 - Manual (Page 30)

30 – 10X MINI SMART DOME CAMERA
How to use OSD Menu
PATTERN SETUP
PATTERN SETUP
PATTERN NO. 1
UNDEFINED
CLR PATTERN
CANCEL
<EDIT PATTERN>
BACK
EXIT
PATTERN Number [1~4 ]
Selects Pattern number to edit.
If a selected pattern number is not defi ned,
“UNDEFINED” will be displayed under selected
pattern number.
CLEAR PATTERN [CANCEL/OK]
Deletes data in current pattern
EDIT PATTERN Starts editing pattern.
Edit Pattern
① By using Joystick, move to start position with
appropriate zoom. To start pattern recording,
press NEAR or ENTER key. To exit this menu,
press FAR key.
EDIT PATTERN 1
MOVE TO START POSITION
[NEAR:START/ FAR:CANCEL]
0/0/x1/N
② Move camera with joystick of controller or run
preset function to memorize the path (mostly
curve path) in a selected pattern. The total
memory size and the rest memory size is
displayed in the form of bar. Maximum 1200
communication commands can be stored in a
pattern.
•
•
•
❖
EDIT PATTERN 1
[NEAR:SAVE / FAR:DELETE]
0/0/X1/N
③ To save data and exit, press NEAR or ENTER key.
To cancel recording and delete record data,
press FAR key.
SCAN SETUP
SCAN SETUP
SCAN NO. 1
UNDEFINED
CLEAR SCAN
CANCEL
<EDIT SCAN>
BACK
EXIT
SCAN Number [1~8]
Selects Scan number to edit.
If a selected Scan number is not defi ned,
“UNDEFINED” will be displayed under selected Scan
number.
CLEAR SCAN [CANCEL/OK]
Deletes data in current Scan
EDIT SCAN Starts editing Scan.
Edit Scan
① Press NEAR or ENTER key in “NO” list to start
Scan setup.
EDIT SCAN 1
NO. ACTION NO. DWELL OPT
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
SAVE
CANCEL [NEAR:EDIT]
•
•
•
❖