Spectra Logic 2K - Manual (Page 12)

Chapter 2. Installing the Library
12
1. Remove the cardboard tray from the top of the box. This tray contains the
accessories for the library (see Library Accessories on page 13).
2. Remove the top piece of foam protecting the library.
3. Lift the library out of the box.
Warning: Take care when lifting the library. It weighs approximately 30
pounds.
4. Remove the plastic overwrap, taking care not to scratch the paint on the library’s
exterior.
5. With the library still sitting up on its end, use the library door key to open the
library door.
6. Remove the plastic and foam protecting the robotic picker (Figure 2-2 and
Figure 2-3).
Figure 2-1 Unpacking the library.