Spectra Logic 2K - Manual (Page 35)

Chapter 4. Using the Library
35
About AIT Bar Code Labels
Review the following information before attaching bar code labels to AIT data
cartridges.
Note: Spectra Logic bar code labels are pre-approved for use with the
Spectra 2K library; keep this information for future reference.
Label Quality Use labels designed for AIT data cartridges. Avoid poor quality labels having
poor contrast and resolution.
Bar Code Type Use only bar codes with standard 3-in-9 encoding (Standard 39 Code).
Number of Characters Use labels with eight or fewer characters (including zeros).
Checksums Bar code labels are available with or without checksum characters; the
Spectra 2K library accepts only bar code labels with a checksum character.