Spectra Logic 2K - Manual (Page 21)

Chapter 2. Installing the Library
21
Inserting Media
The simplest way to insert media into your library is to load the DCM(s) with tapes
before installing the DCM(s) in the library. To do this, insert tapes one at a time into
the individual slots in the DCM, with the clear plastic window of the cartridges facing
away from the drives.
Note: For additional information regarding inserting media into the
DCM, see Figure 4-5 on page 37.
Installing the Data Cartridge Magazine(s)
A library may be configured to hold 15 cartridges (one DCM) or to hold 30 cartridges
(two DCMs). To install your first or only DCM, proceed as follows:
1. Use the library door key to open the library door.
2. Remove the DCM from its protective packaging.