Sony MZ-NHF800 User Manual
Page 26
26
To tune in a station quickly
In step 3, slide and hold the jog lever until
the frequency indication begins to change.
The remote control automatically scans
the radio frequencies and stops when it
finds a clear station.
To improve the broadcast
reception
•
For FM: Extend the headphones/
earphones cord, which act as the FM
antenna.
•
For AM: Orient the built-in AM
antenna inside the remote control
horizontally to obtain optimum AM
reception.
If an FM broadcast is hard to
tune in
Press SOUND repeatedly until “Local”
appears in the display. The noise will be
reduced.
When you cannot operate the
radio
Make sure the remote control is not
locked
.
•
The radio will not operate if the remote
control is not connected to the recorder.
•
The volume of radio and MiniDisc can be
adjusted individually using the supplied
remote control.
•
Playback or recording stops when you use the
radio.
•
There is a DC-DC converter attached to the
remote control cord.
When listening to an AM program, keep the
remote control away from the DC-DC
converter, otherwise, noise may be heard.
•
Do not place the remote control close to
another electronic device, such as the recorder
itself, another radio, a TV, a mobile phone, or
a computer, as this may cause noise in the
reception.
•
When you use the radio, it is recommended
that you use a new alkaline dry battery since
more power is consumed by the radio than by
MiniDisc playback.
•
If you turn on the radio while the recorder is
off, the radio will not begin operating
immediately even when “QuickMode” is set
to “Quick On”.
Notes