Sony MZ-NHF800 - Manual (Page 95)

95
NO GROUP • You tried to release a group setting with a disc that has no groups.
, Insert a disc with group settings.
• You selected “ : Erase” with a disc without group setting.
, You cannot erase groups with a disc with no groups.
NO INPUT
SIGNAL • The recorder could not detect digital input signals.
, Make sure that the source is connected firmly (page 19).
NO NAME • You tried to select “Artist” in the Main play mode with a disc that has no
artist name information.
• You tried to select “by Artist” in the Search function with a disc that has no
artist name information.
NON
GROUPED
TRACK • You selected “ : Move” or “ : Erase”, or you tried to label a group
while the recorder is stopped or while playing a track that does not belong to
a group.
, Select a track within a group you want to edit, and then do the editing
operation again.
NotENOUGH
POWER TO
EDIT • You tried to edit the contents of a 1GB Hi-MD disc with insufficient battery
power for editing (page 88).
, Connect the AC power adaptor to the recorder or insert a new alkaline
dry battery.
NotENOUGH
POWER TO
REC • You tried to record on a 1GB Hi-MD disc with insufficient battery power for
recording (page 85).
, Connect the AC power adaptor to the recorder or insert a new alkaline
dry battery.
NO TITLE • You tried to select “Album” in the Main play mode with a disc that has no
album name information.
• You tried to select “by Album” in the Search function with a disc that has no
album name information.
NO TRACK • You tried to play a disc with no recorded tracks.
, Insert a recorded disc.
NO TRACK
IS
SELECTED • You selected “ : Move” or “ : Erase”, or you tried to label a track
without first selecting a track.
, Do the editing operation again after selecting the desired track first.
P/B ONLY
DISC • You tried to record or edit on a premastered disc (P/B stands for
“playback”).
, Insert a recordable disc.
PC – –MD • The recorder is connected to the computer.
PROTECTED
DISC • You tried to record or edit on a disc with the tab in the record-protect
position.
, Slide the tab back (page 82).
PUSH STOP
BUTTON • You tried to open the lid by sliding the OPEN switch while the recorder was
storing disc information with the dedicated USB cable connecting the
recorder to a computer.
, Operation must be done only after pressing x and “SYSTEM FILE
WRITING” has disappeared from the display.
Message Meaning/Remedy