While editing – Sony MZ-NHF800 User Manual

Page 88

Advertising
background image

88

No sound comes
through the
headphones/
earphones.

• The headphones/earphones plug is not firmly connected.

, Plug in the plug of the headphones/earphones firmly to the remote

control. Plug in the plug of the remote control firmly to i.

• The plug is dirty.

, Clean the plug.

The disc cannot be
played on another
component

• The component does not support Hi-MD.

, Discs used in Hi-MD

mode

can be played only on components that

supports Hi-MD.

The recorder skips
to the next or
previous group (or
skips several tracks
ahead or behind)
when you press the
5-way control key
towards . or
>.

• You pressed GROUP before pressing the 5-way control key towards

. or >.
, The recorder returns to normal if no operation is made for 5

seconds.

The edited tracks
may exhibit sound
dropout during
search operations.

• This occurs due to the MiniDisc system limitation. The fragmentation

of data may cause sound dropout while searching because the tracks are
played in higher speed than normal playback.

There is no R-
channel sound
output when
playing a track
recorded from a
cassette deck or
through an
amplifier, or when
listening to sound
from a cassette deck
or amplifier.

• There is no R-channel output if the cassette deck or an amplifier is

connected with a monaural cord.
, Make sure to use a stereo connecting cord. If, however, the

connected equipment is monaural, there will be no R-channel
sound output even with a stereo connecting cord.

While editing

Symptom

Cause/Remedy

“NotENOUGH
POWER TO EDIT”
appears and editing
cannot be done on a
1GB Hi-MD disc.

• Editing is not possible when using a 1GB Hi-MD disc even when the

battery level indication shows enough power remaining while the
recorder is stopped or playing. This is because of a mechanism that
disables editing when the remaining battery power is estimated by the
recorder to be insufficient due to the high power consumption required
for 1GB Hi-MD disc editing.
, Connect the AC power adaptor to the recorder or insert a new

alkaline dry battery.

Symptom

Cause/Remedy

Advertising