Sony MZ-NHF800 - Manual (Page 94)

94
D-L READY • MD Simple Burner is now ready to record an audio CD to the disc in the
recorder using Simple mode. (Refer to “Software Operation” section.)
EJECT DISC
OK • The recorder has finished communicating with the computer and it is safe to
eject the disc from the recorder or disconnect the dedicated USB cable.
End • The recorder reached to the end of the disc while playing or pressing >.
ERROR • There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 92.
ERROR XX • There is an internal malfunction in the system.
, Restart the operation by doing steps 1 to 3 on page 92. If the message
appears again, please consult your nearest Sony dealer.
FORMAT
ERROR DISC • A disc with a format that the recorder does not support was inserted.
• A disc formatted on the computer was inserted.
, Insert a standard MD or a disc used in Hi-MD mode.
, When formatting a disc on the computer, make sure to use the
SonicStage software.
GROUP
FULL • You tried to create a 256th group on a disc used in Hi-MD mode or 100th
group on a standard disc.
, You can create only up to 255 groups (on a disc used in Hi-MD mode)
or 99 groups (on a standard disc) on a disc. Keep the group number
within 255 or 99.
HOLD • The recorder is locked.
, Slide HOLD against the arrow to unlock the recorder (page 17).
IN MENU • You pressed a key on the remote control while selecting a menu on the
recorder.
• You pressed a key on the recorder while selecting a menu on the remote
control.
LOW
BATTERY • A battery is weak.
, Replace the dry battery (page 17).
MEMORY
OVER • You tried to record with the recorder placed where it receives continuous
vibration.
, Put the recorder on a stable place, and start recording again.
NAVI • You pressed a key on the remote control while selecting the Main play mode
on the recorder.
NO
BOOKMARK
TRACK • You selected bookmark play without setting bookmarks.
, Set bookmarks (page 46).
NO DIGITAL
COPY • You tried to make a copy from a disc that is protected by the Serial Copy
Management System. You cannot make copies from a digitally connected
source which was itself recorded using digital connection.
, Use analog connection instead (page 37).
NO DISC • You tried to play or record with no disc in the recorder.
, Insert a disc.
NO DISC
MEMORY • You tried to erase a setting in the Disc Memory on a disc that contains no
settings in the Disc Memory (page 71).
Message Meaning/Remedy