Sony MZ-NHF800 - Manual (Page 64)

64
2
When moving a track out of a group,
skip this step.
When moving a track to a different
group, turn the jog dial until the
destination group appears in the
display, and then press NENT.
3
Turn the jog dial until the destination
track number appears in the display,
and then press NENT to enter the
selection.
Changing the order of a group
on a disc
1
While playing a track within a group
whose order you want to change,
enter the menu and select “Edit” -
“Move” - “
: Move”.
2
Turn the jog dial to select the
destination point on the disc, and then
press NENT to enter the selection.
z
If the track or group has been labeled, press the
5-way control key towards > to make the
track or group name appear in the display
during operation. Press the control key towards
. to return to the track or group number
display.
Erasing tracks and the
entire disc (Erase)
You can erase unnecessary tracks or all
tracks on a disc.
When erasing tracks that have
been transferred from the
computer
If you erased tracks that have been
transferred from the computer, the
transfer authorization of the tracks will be
as follows.
• If the tracks were transferred in Hi-MD
mode, the transfer authorization of the
tracks are restored automatically when
you insert the disc into the recorder and
then connect the recorder to the
computer.
• If the tracks were transferred in MD
mode, the transfer authorization of the
tracks is lost. If you do not want to lose
the transfer authorization, restore the
authorization by transferring the tracks
to the computer again before erasing
them.
You cannot erase non-audio data (for example,
text data or image data) on the disc used in Hi-
MD mode.
Example: Moving the first group in the disc
(Group01) to the position between the
second (Group02) and the third (Group03)
group.
Note
Jog lever
x
DISPLAY