Sanyo VCC-WD8575P - Manual (Page 25)

English 24
Correcting Backlight
3 3 3 3
To correct areas other than center, select from
the options.
TOP : Upper
BOTTOM : Lower
LEFT : Left
RIGHT : Right
CENTER : Area set in step 2 .
• Selected area will be highlighted.
• The respective area varies depending on the setting (position
and size of CENTER) you configured in steps 1 and 2 .
4 4 4 4
Specify a metering level (0 – 15).
• The “CENTER” is fixed to 15 (max).
• The light intensity for the area specified in “15” will be
recognized as the same level as that of the “CENTER”.
• The light intensity specified with 0 (zero) will not be metered.
• Repeat steps
3 and 4 as required.
5 5 5 5 Set “MENU” to “END” and press the SET button.
R Finishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
CENT (BLC SETTING) (Center-weighted Metering) (continued)
Note: The position and size specified for each area are common
to those used for MOTION MASKING setting. (See page
38)
(When TOP is selected)
BOTTOM 0
LEFT 0
RIGHT 0
15
PRESET OFF
MENU BACK
BLC WINDOW WEIGHTING
TOP
CENTER[FIX]
0
(When TOP is selected)
BOTTOM 0
LEFT 0
RIGHT 0
15
PRESET OFF
MENU BACK
BLC WINDOW WEIGHTING
TOP
CENTER[FIX]
0
Settings/ Adjustments
.$%A:' 8%% 9&2 )$ EQTGANGUU DQQM  TVR''''և'' ߆ 'ވ''