Sanyo VCC-WD8575P - Manual (Page 40)

39 English
Specifying Alarm Input
3 3 3 3
Select “MASKING” and specify “ON” and press
the SET button.
R The “MOTION MASKING” screen appears.
4 4 4 4
Select a masking area and specify “ON”.
R Masking will be applied for the area specified with “ON”.
• You can specify multiple masks. Repeat this step as required.
• To disable the mask, select the area and specify “OFF”.
• The position and size for each area are common to those used
for “CENT” (BLC SETTEING). (See page 23)
5 5 5 5
Set “MENU” to “BACK” and press the SET
button.
R Returns to the “MOTION SETTING” screen.
MEMO: Apply masking to what should not be motion-detected;
e.g., frequently moving objects such as trees swaying in
the wind as well as flickering.
SET
MOTION SETTING
SENSITIVITY SET
DURATION 5S
PRESET OFF
MENU BACK
MASKING ON
SET
MOTION MASKING
PRESET OFF
MENU BACK
CENTER OFF
RIGHT OFF
LEFT OFF
BOTTOM OFF
TOP ON
.$%A:' 8%% 9&2 )$ EQTGANGUU DQQM  TVR''''և'' ߆ 'ވ''