Sanyo VCC-WD8575P - Manual (Page 41)

English 40
Settings/ Adjustments
Specifying Alarm Input
6 6 6 6
Select “SENSITIVITY” – “SET” and press the SET
button.
R The “SENSITIVITY” screen appears.
7 7 7 7
Select “MOVE” and specify a sensitivity level
(1 – 10).
R The greater the number, the lower the responsiveness to
movement becomes.
8 8 8 8
Select “Y-DIFFER” and specify a luminance
difference level (1 – 10).
• The greater the number, the lower the responsiveness to the
brightness variation, such as lighting on or off conditions.
9 9 9 9
Select “Y-LEVEL” and specify a luminance level
(1 – 10).
• If false alarms occur very frequently because of noise in dark
screens, increase the value.
F F F F Select “TIME” and specify a detection time of
duration (1 – 60).
• The greater the number, the lower the detectability against
fast-moving subjects.
G G G G Set “TEST” to “ON”.
• You can test the sensitivity of the motion detection. When any
motion is detected, the character color will turn into red on the
screen.
H H H H
Set “MENU” to “BACK” and press the SET
button.
R Returns to the “MOTION SETTING” screen.
SET
MOTION SETTING
MASKING OFF
DURATION 5S
PRESET OFF
MENU BACK
SENSITIVITY SET
SET
SENSITIVITY
MOVE
Y-LEVEL 5
TIME 1
TEST OFF
PRESET OFF
MENU BACK
Y-DIFFER 5
5 ъ
ъ
ъ
ъ
.$%A:' 8%% 9&2 )$ EQTGANGUU DQQM  TVR''''և'' ߆ 'ވ''