Sanyo VCC-WD8575P - Manual (Page 39)

English 38
Settings/ Adjustments
Specifying Alarm Input
For accessing the MAIN MENU, see page 13 – 14.
If you have connected an external door switch or an infrared sensor to the alarm input terminal (ALARM IN) on the rear panel,
specify the following settings. (For connecting alarm devices, see page 10; for the “Alarm Output” settings, see page 44).
This unit has a built-in motion sensor, which outputs alarm signals when any moving subject, such as would be intruder, is
detected. You should adjust the mask settings or detection sensitivity using “MOTION SET”, especially when false alarms
occur very frequently.
1 1 1 1
Set “MODE” to “ALM” or “COLOR”.
ALM : Alarm Input Mode (Normal usage)
COLOR : Mode in which you can switch between COLOR and
B/W externally by using the ALARM IN terminal.
(See page 43)
2 2 2 2
Select “MOTION SET” – “SET” and press the SET
button.
R The “MOTION SETTING” screen appears.
ALARM IN SETTING
SET
ALARM
(SET)
SET
ALARM IN
(SET)
MAIN MENU
LANGUAGE SET
TITLE OFF
SYNC INT
EXPOSURE SET
DAY/NIGHT AUTO
WHITE BALANCE ATW
OPTION SET
PRESET OFF
MENU END
ALARM SET
ALARM SETTING
ALARM OUT OFF
ALARM SIGN OFF
PRESET OFF
MENU BACK
ALARM IN SET
NO
ALARM IN SETTING
MODE ALM
POLARITY
MOTION
OFF
MOTION SET SET
ZOOM OFF
ZOOM TIME 5S
DURATION 5S
SET
ALARM IN SETTING
POLARITY NO
MOTION OFF
ZOOM OFF
DURATION 5S
ZOOM TIME 5S
MODE ALM
MOTION SET SET
.$%A:' 8%% 9&2 )$ EQTGANGUU DQQM  TVR''''և'' ߆ 'ވ''