Sanyo VCC-WD8575P - Manual (Page 46)

45 English
Specifying Alarm Output
1 1 1 1
Select “ALARM SIGN” on the “ALARM SETTING”
screen and specify a displaying time.
• Select from: OFF (not display), 5S, 10S, 15S, 20S, 30S, 1M,
2M, 3M, 4M or 5M (S = second, M = minute)
R If you specify any value other than “OFF”, the camera name on
the screen will blink for the specified time of duration when an
alarm occurs.
2 2 2 2
Set “MENU” to “END” and press the SET button.
R Finishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
ALARM SIGN (Alarm display)
MEMO: • If the camera name is not given, “??...” will blink on the
screen.
• Even if the “TITLE” is specified as “OFF”, the camera
name will blink when an alarm occurs.
(See page 16)
ALARM SETTING
ALARM IN SET
ALARM OUT OFF
PRESET OFF
MENU BACK
ALARM SIGN OFF
CAM1
Alarm occurred
.$%A:' 8%% 9&2 )$ EQTGANGUU DQQM  TVR''''և'' ߆ 'ވ''