Specifying alarm input – Sanyo VCC-WD8575P User Manual

Page 43

Advertising
background image

English

42

Settings/

Adjustments

Specifying Alarm Input

M

M

M

M

Select “ZOOM” and specify the zoom factor for
alarm detection.

• Select from: OFF (no zoom), x 1.4, x 2.0, x 2.5.

N

N

N

N

Select “ZOOM TIME” and specify duration time
for zooming (if you specified “ZOOM” to other
than “OFF” in step

M

).

• Select from: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M or 5M

(S = second, M = minute)

O

O

O

O

Select “DURATION” and specify a time until the
next alarm input becomes enabled.

• Select from: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M or 5M

(S = second, M = minute)

P

P

P

P

Set “MENU” to “END” and press the SET button.

R

Finishes the settings screen and returns to the normal
monitoring screen.

• If you want to return to the previous screen, select “BACK” and

press the SET button.

Note: • If you specify the “ZOOM” function, the center of the

screen will be electronically zoomed in automatically
when an alarm signal is supplied from external devices
such as door switch or infrared sensor, etc.

• Even though the “EL ZOOM” is already specified, the

“ZOOM” settings you configure here will override it. Then
“EL ZOOM” will be set to “OFF”. (See page 54)

• When “ZOOM” is set to “ON”, the detection zone of the

motion sensor is limited to CENTER (initial position and
size). When switching “ZOOM” back to “OFF”, the above
setting will revert to those specified before “ZOOM” was
set to “ON”. Also note that no adjustment is possible for
“BLC” – “CENT” if “ZOOM” is set to “ON”. (See page 23)

• If “BLC” has been set to “CENT”, the “ZOOM” function

will not work. (See page 22)

MOTION SET

SET

ZOOM

ZOOM TIME
DURATION

5S

5S

ALARM IN SETTING

MODE

ALM

POLARITY

NO

MOTION

OFF

PRESET

OFF

MENU

BACK

OFF

Note:

• When the “MODE” is specified with “COLOR”, this

setting will not appear.

• When the alarm output starts, a new detection or an

alarm output cannot be performed until the specified
time of duration elapses.

MEMO: You can blink the camera name on the screen when an

alarm signal is supplied. (See page 45)

.$%A:' 8%% 9&2 )$ EQTGANGUU DQQM  TVR''''և''

߆

'ވ''

Advertising