Sanyo VCC-WD8575P - Manual (Page 37)

English 36
Settings/ Adjustments
Adjusting White Balance
1 1 1 1
Select “AWC LOCK” – “SET”.
R “SET” blinks.
2 2 2 2
Point a camera to a white paper or wall to project
an image on the whole screen, and press the SET
button.
R The blinking of “SET” stops and illuminates, and white balance
adjustment will start. The adjustment will end after about 2
seconds when the blinking of “SET” restarts.
• If the adjustment does not yield a satisfactory result, press the
SET button again.
■ To perform fine adjustment of color
In the “AWC SETTING” screen, select “GO TO MWB” – “SET”, and
press the SET button.
R The “MWB SETTING” screen appears. Specify values manually.
(See page 37)
3 3 3 3
Set “MENU” to “END” and press the SET button.
R Finishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
AWC SETTING (One-Push Adjustment)
AWC SETTING
GO TO MWB SET
AWC LOCK SET
SET
White paper or wall
MEMO: Transferring to the “MWB SETTING” through “GO TO
MWB”, white balance mode (see page 34) will be changed to
“MWB”.
.$%A:' 8%% 9&2 )$ EQTGANGUU DQQM  TVR''''և'' ߆ 'ވ''