Sega INITIAL "D" TYPE TWIN. User Manual

Page 38

Advertising
background image

30

www.seuservice.com

31

www.seuservice.com

FIG. 7. 1 a

Remove the cover from the back of the dispenser.

Place the cards into the dispenser according to the instructions on the sticker annexed to the

dispenser. Refer to the diagram shown on the sticker attached to the Dispenser and insert the
cards into the Dispenser. Be careful not to insert the cards in the wrong direction or with the
wrong side facing up.

The Dispenser can only hold 100 cards. Do not attempt to insert more than 100 cards. Too many

cards may cause the Dispenser to jam or result in other problems.

Insert magnetic cards into the Dispenser in complete packs of 100 or after carefully counting the

number of cards (not to exceed 100).

Reinstall the cover to the dispenser.

Insert the dispenser into the card reader/writer. The dispenser can be inserted only in the

predetermined orientation.

Close and lock the cover.

Secure with the truss screw

FIG. 7. 1 b

Advertising