Sega INITIAL "D" TYPE TWIN. - Manual (Page 95)

86 www.seuservice.com 87 www.seuservice.com
TRUSS SCREW (2),black
UNLOCK
DROP CLOTH TO
PREVENT DAMAGE
19-1 REMOVING THE GD-ROM DRIVE
19. GAME BOARD
 In order to prevent electric shock and short circuit hazards, be sure to turn
power off before performing work.
 Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a fire risk.
 Do not expose the Game BD, etc. without a good reason. Failure to observe
this can cause electric shock hazard or malfunctioning.
Static electricity from your body may damage some electronics devices on the IC
board. Before handling the IC board, touch a grounded metallic surface so that the
static electricity can be discharged.
FIG. 19. 1
 Turn the power off.
 Remove 1 screw from each side of Base Lid R.
 Unlock the base with the Master Key.
 Turn the Lock Handle on Base Lid R to unlock the lid.
 Lower the seat towards the backrest. Slowly lower the backrest until it touches the floor to
prevent damage to the seat part. Put a drop cloth on the floor to prevent damaging the surface of
the seat part.
CAUTION!
WARNING!
* Note: Unit may differ from illustration.