Sierra Wireless Overdrive - Manual (Page 100)

92 Settings
●
Roaming Status — Home, or roaming (outside of Sprint coverage).
●
Allow 3G Roaming — enable or disable 3G roaming.
●
PRL Version — The PRL (Preferred Roaming List) is an account configuration item set by your
service provider. It controls the radio channels and network carrier used by the 3G modem. An
updated PRL may improve your 3G network service.
●
Load 3G PRL — for example, you’ve received via email or downloaded a file.
Alternatively, you can check online for a PRL update — in Advanced settings > WAN > Setup , click
Update 3G PRL .
Resetting the 3G/4G Configuration to Default Settings
Note: Reset the configuration only if instructed by a Sprint representative.

After a configuration reset:

• You must go through the device setup (page 20) and 3G activation. (The latter starts automatically.)

• Any changes you’ve made to the settings are lost.
1. Log in to the home page.
2. Click Advanced settings > Device > About .
3. Click Reset Device to Factory Defaults .
4. When prompted, enter the SPC (Service Programming Code). (If you don’t know your SPC,
contact Sprint.)
You won’t be able to establish a data connection until you:
1. Go through the device setup (page 20).
2. Go through 3G activation or, if using 4G, use pay-as-you-go.