Sierra Wireless Overdrive - Manual (Page 118)

110 Settings
System Events
You can enable or disable, as a group, the logging of the following events:
●
Software update available
●
Network update available
●
Primary WAN failover
●
Primary WAN switchback
●
Unexpected data connection loss
●
Changes to miscellaneous settings
The following system events are always logged:
●
Intrusion alerts
●
Unexpected power loss
●
Critical battery
●
Critical temperature
●
Routing hardware settings reset
●
Firmware update
Enabling and Disabling Logging of System Events
1. Log in to the home page.
2. Click Advanced settings > Device > Log .
3. In the System Events section, select Enable or Disable .
4. Click save .
Note: Certain events are always logged; see “System Events” (above).
Exporting System Events
1. Log in to the home page.
2. Click Advanced settings > Device > Log .
3. Ensure System Events is set to Enable .
4. Click Export .
Clearing the System Events Log
1. Log in to the home page.
2. Click Advanced settings > Device > Log .
3. Ensure System Events is set to Enable .
4. Click Clear log .