Gps panel – Sierra Wireless Overdrive User Manual

Page 88

Advertising
background image

80 Settings

GPS Panel

1.

Log in to the home page.

2.

Click

Advanced settings

(

).

3.

Click

WAN > GPS

.

From this window, you can view or adjust these settings, or perform the following actions:

Enable GPS

— To use GPS, and to configure other GPS settings, this check box must be selected. If

the GPS privacy agreement opens, you must accept it before you can use GPS.

GPS Mode

— How often the device should obtain a fix.

One-time

— Use a single fix. Use this option if you’ll be using your device at the same location.

Continuous

— Obtain fixes on a regular basis. Also known as auto-tracking. Useful for

navigation or turn-by-turn (TBT) applications (for example, driving directions).

Mapping Service

— The mapping service (for example, Google Maps or MapQuest) that displays

the GPS results (in a separate browser window).

Performance Value

— Amount of time the device should wait for a satellite to be discovered.

Automatic

— The device automatically determines the most appropriate setting to use.

Manual

— In the input field, enter the number of seconds the device should wait for a satellite to

be discovered. If this time is exceeded, an error is reported.

Accuracy

Automatic

— The device automatically determines the most appropriate setting to use.

Manual

— In the input field, enter the number of meters to which the data must be accurate.

Note:

If the value is very small (i.e. very high accuracy), the fix may fail.

Fix Rate

— The smaller the number, the more up-to-date the location tracking will be, at the cost of

shorter battery life of the device. Available only if

GPS Mode

is set to

Continuous

.

Metric Units

— Specifies whether to use the metric system when displaying the GPS results (for

example, the altitude, speed, HEPE).

Get fix now

— This button starts a one-time fix (not displayed if

GPS Mode

[above] is

Continuous

or

a GPS session is already in progress). If you change the value from

Continuous

to

One-time

, you

must click

Save

before your changes take effect and the fix becomes possible.

Show GPS Data

or

Hide GPS Data

Advertising