Sierra Wireless Overdrive - Manual (Page 85)

Settings 77
Setti
ngs
The following information is displayed:
●
Model Number
●
Manufacturer
●
Software Version — Firmware version for the routing hardware of the device.
●
Activation Status — 3G activated or not activated.
●
Activation Date — Date that the 3G modem was first activated.
●
Network Operator — The carrier that your device was activated for.
●
Wi-Fi Firmware Version
●
Router PRI Version — PRI version for the routing hardware of the device. The PRI (Product
Release Instructions) is a file that contains the settings used to configure wireless products for a
particular service provider, customer, or purpose.
●
MSID (Mobile Station ID) — Also known as IMSI (International Mobile Station Identity) — an
identifier of a device on the 3G network.
●
PRI Version — PRI version of the 3G component of the device.
●
ESN or MEID .
The ESN (Electronic Serial Number) is the unique first-generation serial number assigned to the
3G component of the device.
The MEID (Mobile Equipment Identifier) is the unique second-generation serial number
assigned to the 3G component of the device.
●
PRL Version — The PRL (Preferred Roaming List) is an account configuration item set by your
service provider. It controls the radio channels and network carrier used by the 3G modem. An
updated PRL may improve your 3G network service.
●
Firmware Version — Firmware version of the 3G component of the device.
●
MAC Address — MAC address of the 4G module. Each wireless device has a unique MAC
address (assigned by its manufacturer).
●
Firmware Version — Firmware version of the 4G component of the device.
The window also has buttons to:
●
Save the information to a text file.
●
Reset the 3G/4G configuration of the device to default settings. See “Resetting the 3G/4G
Configuration to Default Settings” on page 92.
Log Panel
1. Log in to the home page.
2. Click Advanced settings ( ).
3. Click Device > Log .