Siemens Unix V4.0 - Manual (Page 132)

Configuring Advanced Server for UNIX Configuration for shared client printer
Product Manual U7613-J-Z815-6-76
©
S
iem
e
n s N
ix
dor
f
In
fo
rm
at
io
n
s s y s te
m
e A
G
1
9 9 5
P
fad
: D:
\O
7 613
e6
\u
761
3e
.k
05
The command creates a device for the shared client printer in the spooler administration
called printername. If printername is not specified, clientname is used as the name of the
printer. After successful completion, UNIX users can print to the client printer by issuing the
following command:
For the LP spooler: lp -d printername filename
For Spool V4.x: xpadd -job -de printername -dr filename ...
Examples:
To add an HP LaserJet printer attached to the client computer named pc2 via the CLIPR
interface, type the following command:
addclipr pc2 "" hplaserjet
To add a postscript printer that is attached to the client computer named pc3 and which is
shared with the share name printer3 (PRSRV interface), type the following command:
addclipr pc3 "" POSTSCRIPT PRSRV printer3
The device connection for the shared client printer is thus entered in the spooler adminis-
tration; you have now created the printers, e.g.
pc2 .
You can now use this printer from UNIX with following commands:
for Spool V4.x: xpadd -job -de pc2 -ct SIMPLE -dr...
for the LP spooler: lp -d pc2 ...
5.6.2 Delclipr
Purpose:
The delclipr command is used to delete an Advanced Server client printer device from the
configured Spooler.
Syntax:
delclipr printername
where:
printername specifies the client printer destination name recognized by the configured
Spooler.