Siemens Unix V4.0 - Manual (Page 178)

Installing Network and Administrative Client Software Getting Online Help
Product Manual U7613-J-Z815-6-76
©
S
iem
e
n s N
ix
dor
f
In
fo
rm
at
io
n
s s y s te
m
e A
G
1
9 9 5
P
fad
: D:
\O
7 613
e6
\u
761
3e
.k
08
7. During the installation of Windows NT Server Tools, the Setup program created the
new-conf.sys and new-vars.bat files in the workstation’s srvtools directory.
Each of these files contains lines that you must copy to the client computer’s config.sys
and autoexec.bat files as follows:
Ê The files statement in the \srvtools\new-config.sys file is the recommended number of
files. Edit the config.sys file to contain the following line:
files=x
where x is a number equal to or greater than the recommended number in the
new-conf.sys file.
Ê Edit the autoexec.bat file to reflect the following changes:
● The directory containing the Windows NT Server Tools must be on the PATH
line.
● If you are in a time zone other than Pacific Standard Time (PST), copy the time
zone statement recommended in the
\srvtools\new-vars.bat file. Add a set tz line
to set the time zone.
For example, if you are in Paderborn, you would add the following line:
SET TZ=UCT-01:00DST
8. Reboot the client computer.
8.4 Getting Online Help
Most of the information that you need to learn about using network-based administrative
clients now is provided in online Help. You can refer to online Help as your primary source
of information on how to perform administrative procedures.
For information about how to navigate online Help, click on Help or consult your Windows
NT Workstation or Windows 95/98 documentation.