Siemens Unix V4.0 - Manual (Page 325)

Lanman.ini File Parameters
Product Manual U7613-J-Z815-6-76
©
S
iem
e
n s N
ix
dor
f
In
fo
rm
at
io
n
s s y s te
m
e A
G
1
9 9 5
P
fad
: D:
\O
7 613
e6
\u
761
3e
.k
14
network The network device names and NetBIOS name-
passing type for the network(s) the server should use.
Values: sets of four items separated by commas, each
set of four separated from the next by a space. The
following four items are in each set:
1. The device name for virtual circuit access.
2. The device name for datagram network access.
3. A digit identifying the NetBIOS interface convention
used by the two devices above. Currently there is
one convention compiled into the server:
0 = RFC 1001/2 NetBIOS convention
4. The name of the transport provider, as returned by
the nlsprovider system call. (For networks not
configured to accept incoming connections through
the UNIX system listener program, this can be any
arbitrary string.)
Default: /dev/inet/nb,/dev/inet/nbd,0,nbrfc
newpoll Specifies whether the new Reliant UNIX poll interface
is to be used. If Reliant UNIX does not support the new
poll, the old poll is used automatically. Default: yes
os2searchfix As a result of a AS/X fix for NT clients, problems have
arisen since AS/X 4.0A1001 with OS/2 clients
displaying files and directories. There is no final
solution to the problem at present, which is why this
parameter can be used to set the new or old behavior.
Please read the readme files supplied to establish
whether this parameter is still required in the current
version.
os2searchfix=no :
– OS/2 “folder" shows either no files or one file
– OS/2 "dir" in the DOS box shows at most 100 files
os2searchfix=yes :
– Deleting a directory tree on Windows NT 4.0 with
“deltree” does not delete all files.
Default : no
[lmxserver] Section Parameters
Parameter Description, Values, and Default Setting
(continued)