Siemens Unix V4.0 - Manual (Page 133)

Configuring Advanced Server for UNIX Configuration for shared client printer
Product Manual U7613-J-Z815-6-76
©
S
iem
e
n s N
ix
dor
f
In
fo
rm
at
io
n
s s y s te
m
e A
G
1
9 9 5
P
fad
: D:
\O
7 613
e6
\u
761
3e
.k
05
Comments:
The delclipr command removes all of the client printer configuration information from the
Advanced Server and the configured Spooler. The print destination printername is removed
from the configured Spooler. If an Advanced Server shared printer queue exists with print-
ername as the only member, the shared printer queue is also deleted.
Example:
To delete the client printer pc2, type
delclipr pc2
PRSRV option guidelines
Username and password
● The shared printer configured with PRSRV should not have a password. The
filter program configured on Advanced Server for UNIX then logs on without a
password with the username
<system name>.cli in the domain in which the
server has been set up. If, for example, the system name of a server is
displayed with
uname -n as server1 , the filter program logs on with server1.cli .
● This username must not exist in the domain.
● If the system is a server (OS/2, Windows NT or UNIX), a user with this
username must not be located in the local account database. Only then the
filter program will receive the rights for the user
GUEST in the user group
GUESTS .
If a user with this username exists already, or if a password has been configured for the
shared printer, the following steps must be carried out:
Ê Set the correct values for the DOMAIN , USERNAME , and PASSWORD parameters in the
/var/opt/lanman/clipr/config/<Client name> file.
● Please note that in the case of an OS/2 server, the rights for the shared printer
are not set automatically for
USERS and GUESTS . Furthermore, blank
usernames are not accepted here.
Using these entries the filter program of Advanced Server for UNIX can log on in the
domain.
Stopping the PC or terminating the Print Manager
If the PC is to be switched off or the Print Manager is to be closed, the associated
“spool-out” must be stopped beforehand on the spool system.
To do this, use
xpchange -dev <device> -so OFF for example ( for Spool V4.x), or
disable <device> (for AT&T Spool).
i
i
!