Siemens Unix V4.0 - Manual (Page 315)

Advanced Server Registry WINS Service Parameters
Product Manual U7613-J-Z815-6-76
©
S
iem
e
n s N
ix
dor
f
In
fo
rm
at
io
n
s s y s te
m
e A
G
1
9 9 5
P
fad
: D:
\O
7 613
e6
\u
761
3e
.k
13
PowerFailAddress REG_SZ String up to 15 characters
Specifies the NetBIOS name to which the server sends a message when it receives a
SIGPWR signal.
Default: * (all users)
You can change the value of this key using the AS/U Administrator.
PowerFailMessage REG_SZ String up to 500 characters
The text of the message to be sent by the server when it receives a SIGPWR signal.
Default: “The system has experienced a power failure. Please close all applications and
files and log off immediately”.
You can change the value of this key using the AS/U Administrator.
PowerMessageInterval REG_DWORD 0 - infinity
Specifies the interval in minutes at which the server repeats the message sent when it
receives a SIGPWR signal. A value of 0 would indicate to send the message one time
only.
Default: 1
You can change the value of this key using the AS/U Administrator.
13.15 WINS Service Parameters
The registry path that contains entries for the Advanced Server WINS service is as follows:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Wins
The \Parameters subkey list all of the non-replication-related parameters needed to
configure a WINS server. It also contains a \Datafiles subkey, which lists all the files that
should be read by WINS to initialize or reinitialize its local database. The following
parameter under the
\Parameters subkey can be set only by changing the value in the
Registry.