12 scanning – Standard Horizon MATRIX GX3000S User Manual

Page 29

Advertising
background image

Page 29

GX3000S

10.12 SCANNING

Allows the user to select the scan type from Memory scan or Priority scan.
“Memory scan” scans the channels that were programmed into memory. “Pri-
ority scan” scans the channels programmed in memory with the priority chan-
nel.

10.12.1 Selecting the Scan Type

1. Press and hold down the [CALL(MENU)] key until

Radio Setup

” menu appears.

2. Press the [ENT] key, then select “

SCAN Type

” in the

Radio Setup

” menu with the CHANNEL selector

knob.

3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “

Prior-

ity

” or “

Memory

.”

5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode

press the [16/9] key.

10.12.2 Memory Scanning (M-SCAN)

1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the

CHANNEL selector knob. Press and hold the
[SCAN(MEM)] key for one second, “MEM” will ap-
pear on the LCD which indicates the channel has
been programmed into the transceivers memory.

3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel

then press and hold the [SCAN(MEM)] key for one second, “MEM” will
disappear in the LCD.

5. To start scanning, just press the [SCAN(MEM)] key

momentarily. “

M-SCAN

” appears on the LCD. Scan-

ning will proceed from the lowest to the highest pro-
grammed channel number and will stop on a chan-
nel when a transmission is received.

6. The channel number will blink during reception.
7. To stop scanning, press the [16/9] or [WX] key.

Advertising