Standard Horizon MATRIX GX3000S - Manual (Page 67)

Page 67 GX3000S
12.14 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup ” menu appears.
2. Press the [ENT] key, then select “ FOG Freq. ” in the
“ Radio Setup ” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select desired
tone frequency.
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.
12.15 RECEIVER AUDIO TONE CONTROL
Allows the treble and bass of the speaker audio to be adjusted for best listening
in noisy enviroments. The effect is similar to adjusting a the treble and bass
controls on a stereo.
1. Press and hold down the [CALL(MENU)] key
until “ Radio Setup ” menu appears.
2. Press the [ENT] key, then select “ TONE CONT. ”
in the “ Radio Setup ” menu with the CHAN-
NEL selector knob.
3. Press the [ENT] key, then select “ BASS ” with
the CHANNEL selector knob.
4. Turn the CHANNEL selector knob to select de-
sired audio responce in the lower frequency
range. Available selections are “
–6 ” through “ +6 .”
5. Press the [ENT] key to store the selected setting.
6. Select “
TREBLE ” with the CHANNEL selector
knob.
7. Turn the CHANNEL selector knob to select de-
sired audio responce in the highr frequency
range. Available selections are “
–6 ” through “ +6 .”
8. Press the [ENT] key to store the selected setting.
9. To exit this menu and return to radio operation mode press the [16/9] key.