2 pa/fog operation – Standard Horizon MATRIX GX3000S User Manual

Page 78

Advertising
background image

GX3000S

Page 78

14.2 PA/FOG OPERATION

The VH-310 Handset is capable of controlling the 30W Public address, 4 fog
horns, bells and whistles.

14.2.1 Operating the PA / Hailer

1. Press the [F] key followed by the [8(PA)] key, activate the

“PA / HAIL” mode.

2. Press the PTT switch and speak into the microphone.
3. To turn up the PA Volume, press the PTT switch and press

the [

] or [

] keys to adjust the Audio output level. The

level can be set from 0 to 30W.

4. To adjust the listen back volume, (while in listenback mode)

press the [VOL] Key, then press the [

] or [ ] key to the

desired listen back volume.

To exit from the PA / Hailer mode, press the [F] key followed by the [8(PA)] key
again.

14.2.2 Operating the FOG Horn

The GX3000S is capable of sending Underway, Stop, Sail, Tow, Horn, Siren,
Aground and Anchor signals.

1. Press the [F] key followed by the [9(FOG)] key, activate the

“FOG HORN” menu.

2. Select the one of the eight functions described above with

the [

] or [ ] key and press the [ENT] key.

3. On the “

Horn

” and “

Siren

” modes, press the PTT switch to

activate the tone through the HAIL/PA speaker.
Press the [

] or [ ] keys to adjust the Audio output level.

The level can be set from 0 to 30W.

4. To adjust the listen back volume, (while in listenback mode)

press the [VOL] Key, then press the [

] or [ ] key to the

desired listen back volume.

To exit from the FOG HORN mode, press the [F] key followed
by the [9(FOG)] key again.

Advertising