Standard Horizon MATRIX GX3000S - Manual (Page 46)

GX3000S Page 46
13. Press any key to listen to the channel to make sure it is not busy, then key
the microphone and call the other vessel you desire to communicate with.
11.5.5 Receiving an Individual Call
When the GX3000S receives a individual call, by default the GX3000S auto-
matically transmits a acknowledgement before switching to the requested chan-
nel. The GX3000S can be set so the GX3000S prompts you to manually send
a reply, refer to section “11.5.2 Setting up Individual Reply.”
1. When an individual call is received, an individual call ringing alarm sounds.
The radio automatically switches to the requested
channel.
2. Press any key to stop the alarm.
3. Press the PTT on the mic and talk to the calling ship.
11.6 CALL WAITING DIRECTORY
The GX3000S logs received distress calls and individual calls. The DSC Call
Waiting feature is similar to an answer machine where calls are this recorded
logs for review. When a call is logged while the radio is set on the DSC Standby
function, a message will appear on the LCD. The GX3000S
can be memorized up to the latest 23 Distress and up to
the latest 56 Distress Call.
11.6.1 Enabling the Call Waiting Feature
Follow the steps below to enable or disable the Call Waiting feature.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup ” menu appears.
2. Turn the CHANNEL selector knob to select “ DSC
Setup ” menu.
3. Press the [ENT] key, then select “ INDIV ACK ” with
the CHANNEL selector knob.
4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select “
Able ” or
“ Unable .”
6. Press the [ENT] key to store the selected setting.
7. To exit this menu and return to radio operation mode
press the [16/9] key.