Connecting a vcr, Connecting a pc – Samsung 580 User Manual

Page 12

Advertising
background image

English - 10

Connecting a VCR

Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the

instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system.
1. Unplug the cable or

antenna from the back

of the TV.

2. Connect the cable or

antenna to the ANT IN

terminal on the back of

the VCR.

3. Connect an RF Cable

between the ANT OUT

terminal on the VCR

and the ANT IN terminal

on the TV.

4. Connect a Video Cable

between the VIDEO

OUT jack on the

VCR and the AV IN 1

[Y/VIDEO] or AV IN 2

[VIDEO] jack on the TV.

5. Connect Audio Cables

between the AUDIO

OUT jacks on the VCR

and the AV IN 1 (or AV

IN 2) [R-AUDIO-L] jacks

on the TV.

If you have a “mono”

(non-stereo) VCR,

use a Y-connector

(not supplied) to

connect to the

right and left audio

input jacks of the

TV. Alternatively,

connect the cable to

the “R” jack. If your

VCR is stereo, you

must connect two

cables.

ANT IN

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not

match the color of the video cable (Yellow).

S-Video Connection
Your Samsung TV can be connected to an S-Video jack on a VCR. (This connection delivers a better picture as compared

to a standard VCR.)
1. To begin, follow steps

1–3 in the previous

section to connect the

antenna or cable to your

VCR and your TV.

2. Connect an S-Video

Cable between the

S-VIDEO OUT jack on

the VCR and the

AV IN 2 [S-VIDEO] jack

on the TV.

3. Connect Audio Cables

between the AUDIO

OUT jacks on the VCR

and the AV IN 2

[R-AUDIO-L] jacks on

the TV.

An S-Video cable may be included with a VCR. (If not, check your local electronics store.)

Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.

VCR Rear Panel

TV Rear Panel

TV Side Panel

RF Cable (Not supplied)



Video Cable (Not supplied)

4

Audio Cable (Not supplied)



VCR Rear Panel

TV Rear Panel

TV Side Panel

Audio Cable (Not supplied)



S-Video Cable (Not supplied)

2

RF Cable (Not supplied)

1

BN68-01392K-ENG.indb 10

2008-03-19 ¿АИД 4:58:07

Advertising