Samsung 580 - Manual (Page 14)

English - 12
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Operation
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
1. Press the POWER button on the remote control.
The message “Menu Language, Store Demo, Channels, and Time will be
set.” is displayed.
Press the ENTER button, then “Select language of the OSD.” menu
is automatically displayed. Press the ENTER button.
2. Press the ▲ or ▼ button to select language, then press the ENTER
button. The message “Select ‘Home Use’ when installing this TV in your
home.” is displayed.
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then
press the ENTER button. The message “Select the Antenna source to
memorize.” is displayed.
We recommend setting the TV to “Home Use” mode for the best picture in
your home environment.
“Store Demo” mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return
to “Home Use” (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU button on the TV for
5 seconds.
4. Press the ▲ or ▼ button to memorize the channels of the selected
connection. Press the ENTER button to select “Start”.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Auto: “Air” and “Cable” antenna signals.
In Cable mode, you can select the correct signal source among STD,
HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the
ENTER button. If you have Digital cable, select the cable system
signal source for both Analog and Digital. Contact your local cable
company to identify the type of cable system that exists in your particular
area.
5. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the ENTER button with
“Stop” selected.
After all the available channels are stored, it starts to remove scrambled
channels (see page 40). And then, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The message “Set the Clock Mode.” is displayed.
➣
➣
➣
➣
➣
➣
Plug & Play
Select ‘Home Use’ when installing this TV in your
home.
Home Use Store Demo
Enter Move
Plug & Play
Select language of the OSD.
Menu Language : English
Enter Move
English
Español
Français
Plug & Play
Menu Language, Store Demo, Channels, and Time will
be set.
OK
Return Enter
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto
Start
Skip Enter Move
Start
Start
Plug & Play
Auto Program in Progress.
Stop
Cable 38
50%
DTV Air : 02 Air : 11
DTV Cable : 23 Cable : 21
Skip Enter
Start
Plug & Play
Selects the cable system.
Analog
Digital HRC IRC
HRC IRC STD
STD
Skip Enter Move
Plug & Play
Removing scrambled channel.
Stop
DTV Cable 41
77%
DTV Air : 05 Air : 12
DTV Cable : 25 Cable : 32
Skip Enter
Plug & Play
Auto Program is completed.
119 channels are memorized.
DTV Air : 05 Air : 24
DTV Cable : 10 Cable : 80
OK
Skip Enter
BN68-01392K-ENG.indb 12 2008-03-19 ¿АИД 4:58:09