Samsung 580 User Manual

Page 26

Advertising

English - 24

When Double (

) mode has been set in PIP, the Picture Size cannot be set.

Temporary image retention may occur when viewing a static image on the set for more than two hours.
After selecting “Zoom1”, “Zoom2” or “Wide Fit”:

Press the ◄ or ► button to select “Position”, then press the

ENTER

button. Press the ▲ or ▼ button to move the picture up and down.

Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER

button. You can initialize the setting.

After selecting “Just Scan” in HDMI (1080i/1080p) or Component

(1080i/1080p) mode:

Press the ◄ or ► button to select “Position”, then press the

ENTER

button. Press the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER

button. You can initialize the setting.

HD (High Definition)

16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Input Source

Picture Size

ATV, Video, S-Video, Component (480i, 480p)

16:9, Zoom1, Zoom2, 4:3

DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P)

16:9, 4:3, Wide Fit, Just Scan

16:9, 4:3

Alternately, you can press the

P.SIZE button on the remote control repeatedly

to change the picture size.

16:

Zoom1 U Move

Zoom2 U Move

16:9
Sets the picture to 16:9 wide mode.

Zoom1
Magnifies the size of the picture on

the screen.

Zoom2
Magnifies the size of the picture more

than “Zoom1”.

Wide Fit U Move

4:

Just Scan

Wide Fit
Enlarges the aspect ratio of the

picture to fit the entire screen.

4:3
Sets the picture to 4:3 normal mode.

Just Scan
Use the function to see the full

image without any cutoff when HDMI

(720p/1080i/1080p), Component

(1080i/1080p) or DTV (1080i) signals

are input.

➣

Size

16:9

Zoom1

Zoom2

Wide Fit

4:3

Just Scan

Return

Enter

Adjust

Reset

Position