Sharp PN-455 - Manual (Page 17)

ENGLISH
17
E
AUDIO IN
R L
INPUT4
(VIDEO)
Video connection cable (*2)
(Red) (White)
(Red) (White)
Audio cable
Video
Audio - Right
Audio - Left
Video cable
Output terminals on
connected equipment
Audio input
terminals
Composite video input terminal
Compatible video signal NTSC (3.58 MHz)
▼ Rear view
*1 S-video input will have priority over composite video when connected.
*2 When you connect the monitor with equipment that has a video output terminal, you can use the supplied
video connection cable as shown in the illustration above.
PC ANALOG RGB OUTPUT TERMINAL
• Video signal from INPUT2 (PC analog) is output. Use when connecting multiple monitors in a daisy
chain via RGB cables (commercially available). See page 20 for a detailed connection example.
AUDIO OUTPUT TERMINAL
• Audio from the equipment connected to the audio input terminal or PC audio input terminal is output.
Connect to the audio input terminal of the connected equipment using an audio (RCA) cable (com-
mercially available) or a PC audio cable (commercially available).
• The terminal for which audio is output differs by screen mode.
- When input mode is INPUT1 or 2, the audio from the PC audio input terminal will be output.
- When input mode is INPUT3 or 4, the audio from the audio input terminal will be output.