Rs-232c command table, Power control/input selection, etc, English – Sharp PN-455 User Manual
Page 47: How to read the command table
ENGLISH
47
E
Power control/Input selection, etc.
RS-232C command table
<How to read the command table>
Command:
Command field (See page 40.)
Direction:
W
When the “Parameter” is set in the parameter field (see page 40), the
command functions as described under “Control/Response Contents”.
R
The returned value indicated under “Reply” can be obtained by setting
“????”, “___?” or “???+” (repeater control) in the parameter field (see page
40).
Parameter:
Parameter field (See page 40.)
Reply:
Response (Returned value)
* A circle indicates commands which can be used in power standby mode.
0
1
0
1
2
3
4
0
1
2
1
2
3
4
Yes
Yes
W
R
W
R
POWR
INPS
Power Setting
Input Selection
Control item
Command Direction
Parameter
Reply
Control/Response contents
*
Switches to standby.
Returns from standby.
Standby mode
Normal mode
Waiting mode
Toggle change
INPUT1 : DVI
INPUT2 : RGB
INPUT3 : Component
INPUT4 : S-Video/Video
INPUT1 : DVI
INPUT2 : RGB
INPUT3 : Component
INPUT4 : S-Video/Video
*can be used in standby mode