Sharp PN-455 - Manual (Page 35)

ENGLISH
35
E
■ Switching the screen size (INPUT1 / INPUT2)
WIDE ZOOM 1 ZOOM 2
Dot by Dot NORMAL
Displays image so it fills the
screen vertically, while
maintaining the original
aspect ratio.
Displays image so it fills the
entire screen. Use this size if ZOOM1
cuts off the subtitles. Displays edge portion of
the image which is normally
cut off.
Detects the resolution of
the signal and displays an
image with the same
number of pixels on the
screen. (See page 56.)
■ Switching the screen size (INPUT3 / INPUT4)
The desired screen size can be selected to suit the input signal.
WIDE ZOOM 1 ZOOM 2
Dot by Dot NORMAL
For 4:3 “Standard” pictures.
A side bar appears on each
side.
In this mode the image is
progressively stretched
toward each side of the
screen. Use this size if ZOOM1
cuts off the subtitles. Displays edge portion of
the image which is normally
cut off.
Detects the resolution of
the signal and displays an
image with the same
number of pixels on the
screen.