Sharp PN-455 - Manual (Page 54)

54
E
Specifications
■ Product Specifications
Model PN-455
LCD element
45" wide (113.1 cm diagonal) ASV low-reflection black TFT LCD
Max. resolution (pixels) 1920 x 1080
Max. colors 16.77 M colors (8 bits/color)
Viewing angle 170° right/left/up/down (contrast ratio ≥10)
Screen active area inch (mm) 38- 7 /
8
x 21- 7 /
8
(985.9 X 554.6)
Computer input signal Digital DVI 1.0 standard-compliant, analog RGB (0.7Vp-p) [75Ω]
Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video signal system NTSC (3.58MHz)
Plug and play VESA DDC2B
Power management VESA DPMS, DVI DMPM
Input terminals Computer signal Digital DVI-D 24 pin
Analog Mini D-sub 15 pin, 3 rows
Computer audio 3.5 mm mini stereo jack
Serial RS-232C
Composite video BNC *1
S-video 1 line *1
Component BNC (Y, Pb/Cb, Pr/Cr)
Audio RCA pin (L/R)
Output terminals Computer signal Analog *2 Mini D-sub 15 pin, 3 rows
Serial RS-232C
Audio
RCA pin (L/R)
Speaker 10 W + 10 W [6Ω]
Power requirement AC120 V, 60 Hz
Operating temperature 0°C to 40°C
Operating humidity 20% to 80% (no condensation)
Power consumption 312 W, 18 W in waiting mode, 2.9 W in standby mode
Dimensions inch (mm) Approx. 42- 7 /
8
x 3- 3 /
4
x 25- 3 /
8
(1,089 x 96 x 645) (excluding protrusions)
Weight lbs. (kg) Approx. 59.5 (27)
*1 S-video input will have priority over composite video when connected.
*2 Through output for the analog computer input signal. Does not support plug and play.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice.
The performance specification figures indicates are normal values of production units: There may be
some deviation from these values in individual units.