Sharp PN-455 - Manual (Page 39)

ENGLISH
39
E
2.
Daisy chain connection from a single PC...... Advanced operation
Connect with RS-232C straight cable between the PC COM port (RS-232C connector) and the RS-
232C input terminal on the back of monitor.
Next, connect RS-232C straight cable to the first monitor’s RS-232C output terminal and to the
second monitor’s RS-232C input terminal. Connect in the same way to the third and subsequent
monitors. The number of connectable monitors varies depending on the length of the cable used and
the surrounding environment.
Communication conditions
Set the RS-232C communication settings on the PC to match the monitor’s communication settings.
RS-232C straight cable
RS-232C
input terminal RS-232C
input terminal
RS-232C
INPUT
RS-232C
OUTPUT RS-232C
OUTPUT
RS-232C
INPUT
To COM port
RS-232C
output terminal RS-232C
output terminal
▼ First monitor
▼ PC
▼ Second monitor
Baud rate 9,600 bps
Data length 8 bits
Parity bit None
Stop bit 1 bit
Flow control None