Sharp PN-455 - Manual (Page 56)

56
E
PC Digital/Analog Signal Input Compatibility Chart
• Video Analog RGB (0.7 Vp-p) [75 Ω]
Conforms to DVI (digital visual interface) standard 1.0
• Sync H/V separate (TTL: Positive/negative), Sync-on-green,
Composite sync (TTL: Positive/negative)
• Supported frequencies See the Screen resluton chart shown below.
VESA
• IBM AT compatible
Wide
US TEXT
Screen resolution Hsync Vsync Dot frequency Analog signal Digital signal
640 x 480
800 x 600
1024 x 768
1280 x 1024
848 x 480
852 x 480
1280 x 720
1280 x 768
1360 x 768
1366 x 768
1920 x 1080
720 x 400
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
63.3 kHz
31.1 kHz
31.7 kHz
44.7 kHz
47.986 kHz
60.15 kHz
47.7 kHz
48.3 kHz
67.5 kHz
31.5 kHz
60.0 Hz
72.0 Hz
75.0 Hz
56.0 Hz
60.0 Hz
72.0 Hz
75.0 Hz
60.0 Hz
70.0 Hz
75.0 Hz
60.0 Hz
60.0 Hz
60.0 Hz
60.0 Hz
60.0 Hz
75.0 Hz
60.0 Hz
60.0 Hz
60.0 Hz
70.0 Hz 25.175 MHz
31.5 MHz
31.5 MHz
36.0 MHz
40.0 MHz
50.0 MHz
49.5 MHz
65.0 MHz
75.0 MHz
78.75 MHz
108.2 MHz
33.3 MHz
35.0 MHz
74.4 MHz
81.0 MHz
102.977 MHz
84.7 MHz
81.9 MHz
148.5 MHz
28.3 MHz
* All are compliant only with non-interlaced.
* If the monitor is receiving timing signals that are not compatible, [OUT OF TIMING] will appear. In this case,
please change the setting so that the timing signals will be compatible with the monitor, according to your PC
manual.
* If the monitor is not receiving any signal (sync signal), [NO SIGNAL] will appear.
■ Screen resolution chart