Saleen 10-8002-C11670C - Manual (Page 4)

4
Function:
Page
I Remove the front fascia 5-7
II Remove shroud 8
III Stock Headlamps Removal 9
IV Ballast Install 10-12
V Install HID harness 13-16
VI Headlamp alignment 17
Part Number Descriptions Qty
00-9011-C11360* SCREW, BUTTON HD SOCKET CAP SCREW, 18-8 SS, 10-32X1.25" 5
00-9003-C11359* LOCKNUT, NYLON 18-8 SS, 10-32 5
06-1202-C11361A SPACER, BALLAST 1/2" PLASTIC 2
06-1202-C11362A SPACER, BALLAST .75" PLASTIC 3
06-1202-C11319A HARNESS, HID 2005 MUISTANG 1
06-1202-C09903A HEADLIGHT, BI-FUNCTION HID 5 3/4" RH KIT 1
06-1202-C09904A HEADLIGHT, BI-FUNCTION HID 5 3/4" LH KIT 1
00-9001-C07636* CAPSCRW BUT HD M6x1x16mm SS 1
069-700 4” Zip tie 10
069-310 SCREW PAN HD PHIL SELF DRIL 410 SS #8-18x1/2" 2
00-1202-C11457* COVER, HID BALLAST FOR 05 MUSTANG 2
Obtain the following tools
• ¼” drive ratchet
• ¼” drive 5.5 mm shallow socket
• ¼” drive 8 mm socket
• ¼” drive 10 mm deep socket
• ¼” drive 10 mm shallow socket
• ¼” drive 10 mm shallow wobbly socket
• ¼” drive 1/8” Alan tool
• ¼” drive 3/8” deep socket
• ¼” drive 8” extension
• ¼” drive Short Phillips #2 bit
• Panel puller
• Drill
• Drill bit ¼”
• Drill bit 1/8”
• Panel puller
• Phillips head screw driver 10” long shaft