Saleen 10-8002-C11670C - Manual (Page 6)

6
4. Underneath the front fascia (Figure 4),
there are four screws that need to be
removed. Use the ¼” drive air ratchet
with a 5.5 mm shallow socket.
5. Remove the bolt shown in Figure 5.
There are two of these bolts. Use the
¼” drive air ratchet with a 10 mm
shallow wobbly socket.
6. Repeat steps 1 and 2 on the right side
of the car.
7. Remove the fascia by placing the palm
of your hand (see Figure 6 for location)
and push down until the fascia loosens.
See Figure 3. Let the fascia set on the
front frame in order to disconnect
harnesses. Figure 4
Figure 5 Figure 6